Steve Vick International has produced a profile beam, the K-bar, which allows accurate readings of reinstatement surface profiles to comply with the specification for the excavation and reinstatement of the highway.
Compact and simple to use for either spot checking or programmed monitoring, the K-bar beam is 1m long. Extension bars in multiples of 1m are available if required.
The calibrated depth gauge measures both crowning and edge depression and is graded in 1mm graduations from zero to 50mm. The reading can be taken off site, away from traffic and a spot marker facility allows it to be replaced on to an exact location so that precise repeat measurements can be taken.
Tel: (01225) 480488