Your browser is no longer supported

For the best possible experience using our website we recommend you upgrade to a newer version or another browser.

Your browser appears to have cookies disabled. For the best experience of this website, please enable cookies in your browser

We'll assume we have your consent to use cookies, for example so you won't need to log in each time you visit our site.
Learn more

Corroded rock anchors caused A5 failure

Widespread corrosion of rock anchors on the A5 in Wales led to its closure last month, the Welsh Assembly confirmed this week.
The steel bolts designed to support the rock faces overlooking a 640m cutting suffered damage ranging from minor surface attack to total failure, with two steel plates at the rock face failing and 'popping' off in 2002 (NCE 1 June).Welsh Assembly officials said that the Mott Macdonald risk assessment, which branded the cutting unstable and led to the immediate closure of the highway, found that of 15 anchors tested 13 had corroded.The Assembly refused to comment on the likely cause of the corrosion as it is currently locked in talks with the cutting's original consultant Rust Consulting, now owned by Parsons Brinckerhoff and contractor Miller, now owned by Morgan Est.Motts study found that water was seeping into the anchor holes, but experts said it is unlikely that corrosion would be caused by the this alone. Former ICE president and tunnelling guru Sir Alan Muir Wood said:'It would seem that there is some particular feature of the rock that [when met with water] is causing this to happen,' he said.Designing against it is relatively simple, said Muir Wood: 'There are types of bolts and anchors encased in concrete and sometimes you have sheathed bolts.'A total of 400 anchors ranging between 6.5m and 18m in length are used to support the rock faces either side of the cutting.Lift tests were carried out on the anchors and a large number were found to be under significantly greater stresses than they were designed for, according to an Assembly spokesman. Design solutions for remedial work are now being explored by contractor Jones Bros and its designer Hyder Consulting, with re-profiling of the most likely option the north face of the cutting, where corrosion is most extensive.John McKennaRelated links:Today's top stories

Have your say

You must sign in to make a comment

Please remember that the submission of any material is governed by our Terms and Conditions and by submitting material you confirm your agreement to these Terms and Conditions. Please note comments made online may also be published in the print edition of New Civil Engineer. Links may be included in your comments but HTML is not permitted.